• Lock Dimensions
• |
• Fitting Instructions
• |
• Fitting Template
• |
• Catch Options
• |
• Shields Fittings
• |
• Barrier Adaptations
• |
• Pin Blanking
• |

Multiple-Lock Catch Options

Multiple-Locks catches can be fitted through the front or rear of the Multiple-Lock. The most popular options are the bolt-on catch and the chain catch. The bolt-on catch is 12mm stainless steel and is designed to be bolted permanently in place. This catch option is compatible with doors, cabinets, hatches, manhole covers, gates and vehicle barriers. The chain catch is manufactured from 8mm marine grade stainless steel and 12 mm plate and allows for flexible installations. This catch style is often used for low quality gates, farm gates etc. Chain catches are also ideal for securing valves and plant.

Versatile installations

Multiple-Lock installation is possible in virtually any conceivable situation, however the best format and orientation is not always obvious. Our installation styles page details a selection of specific installations using various catches, bodies and orientations, however if you require further assistance please e-mail Technical Support or ring your nearest office and ask for Technical Sales.

Cylinder Lock Converter

The Cylinder Lock Converter allows Multiple-Locks to be installed to many door styles. The Multiple-Lock replaces the existing cylinder lock and is compatible with the existing internal door hardware/ furniture including panic bar locks and other exit hardware. The door remains operable from both sides. (Minimum order thresholds apply to this product).

Sliding Door Frame Catch

This catch allows Multiple-Locks to be installed on rebated doors, hatches etc and is ideal for roof-top access, cabinet doors, and ladder hatches where fire regulation exclude the installation of obstacles which restrict the width of the escape route. The catch is sprung loaded and upon removal of any on pin can be retracted from the supplied striker plate in the door frame.

The catch fits all standard Multiple-Locks regardless of size but is incompatible with Multiple-Lock Shields.

Door Frame Catch

This catch allows Multiple-Locks to be installed on rebated doors, hatches etc and is ideal for roof-top access, cabinet doors, and ladder access points. The catch fits all standard Multiple-Locks regardless of size and is compatible with Multiple-Lock Shields.

Please note the catch protrudes from the door frame in the open position, this can contravene fire regulations in some installations. In such circumstances please use the Sliding Door frame Catch detailed below.

Bolt-on and chain-catch options

Use a standard bolt-on catch to allow shared access to gates, doors cabinets etc. Use a Chain catch wherever a standard Multiple-Lock is unsuitable.

Aside from normal gate and door applications, these catches also allow shared access to plant, safety equipment, valves and vehicle barriers.

For tubular, CHS and pipe frames we supply an optimized lock/ catch and fitting kit 05-TK for between 1 and 5 users or 10-TK for between 1 and 10 users

Tip: Click on the thumbnails to view larger version.