Mobile Multi-Locks: instant installation and temporary shared access
Mobile locks such as the Dual Multi-Lock are designed to fit wherever a padlock can be fitted and as such use and require a third party hasp or pad bar. The only prerequisite is that the shackle aperture on the hasp or pad bar needs to be at least 10mm (3/8") wide. As a rule of thumb, if a good quality single padlock was originally installed, then a Dual will fit without problems. The only exception to this rule is if the padlock accommodation area is very tight such as within manhole covers and other specialised single user hasp designs.
Static Multi-Locks: permanent shared access
The static Multi-locks do not use third party hasps and are designed to replace existing or conventional padlock hasps on any installation. Static models include the 5, 10 and 20 padlock Multi-Locks. Due to the wide range of possible structures that our clients install a Multi-Lock onto we produce a range of body and
catch options to ensure a swift trouble free installation. Therefore Multi-Lock installation is possible in virtually any conceivable situation, however the best format and orientation is not always obvious. If a compatible installation can not be seen in the
catch options and
Installation styles please e-mail
Technical Support or ring your nearest office and ask for Technical Sales.
