Bolt-on and chain-catch options

Using these catches as well as the normal gate applications shared access to plant, safety equipment, valves, etc and vehicle barriers can be achieved.

For tubular, CHS and pipe frames we supply an optimized lock/ catch and fitting kit 05-TK for between 1 and 5 users or 10-TK for between 1 and 10 users

Door Frame catch

This catch allows Multi-Locks to be installed on rebated doors, hatches etc. and is ideal for roof-top access, cabinet doors, and ladder access points. The catch fits all standard Multi-Locks regardless of size and is compatible with Multi-Lock Shields.

Please note the catch protrudes from the door frame in the open position, this can contravene fire regulations in some installations. In such circumstances please use the Sliding Door frame Catch detailed below.

Sliding Door Frame catch

This catch allows Multi-Locks to be installed on rebated doors, hatches etc. and is Ideal for roof-top access, cabinet doors, and ladder hatches where fire regulation exclude the installation of obstacles which restrict the width of the escape route. The catch is sprung loaded and upon removal of any on pin can be retracted from the supplied striker plate in the door frame.

The catch fits all standard Multi-Locks regardless of size but is incompatible with Multi-Lock Shields.

Fire door catches

The Multi-Lock replaces the existing cylinder lock and is compatible with the existing door hardware/ furniture including panic bar locks and other internal exit hardware. The door remains operable from both sides. (Minimum order thresholds apply to this product)

Europe/Worldwide: Tel/ Fax: +44 (0)1224 861046 e-mail
Americas: Tel: 416 364 5625 e-mail